Accès au marché
December 9, 2022 | Written by GreenSoft Technology, Inc.
Product Recalls Due to EU RoHS, EU REACH, and EU POP Violations
4 products removed from European market due to EU RoHS, EU REACH, and EU POP violations
In the fourth quarter of 2022, importers of four products were ordered to recall their products from the European market for failure to comply with the EU RoHS Directive, the EU REACH Regulation, and the EU POP Regulation.
The recalled products include an antenna power supply, a handheld toy vacuum, a PCI card, and an air humidifier.
The EU Safety Gate published the following alerts due to the violations, which are resulting in environmental risk:
Antenna Power Supply
Description:
The solder has an excessive concentration of lead (Pb) (measured value up to 61.4%). Lead poses a risk to the environment.
The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Regulation Violation(s):
EU RoHS 2 Directive
Alert Number/Link:
Handheld Toy Vacuum (Electric Insect Trap)
Description:
The solder has an excessive concentration of lead (Pb) (measured value up to 38.08%). Lead poses a risk to the environment. The plastic wire cape of the toy contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), Diisononyl phthalate (DINP) (measured values up to 2.30%, 2.18% and 2.44% by weight respectively). These phthalates may harm the health of children, possibly causing damage to their reproductive system. The product also contains short chain chlorinated paraffins (SCCPs) (measured value 4%). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bioaccumulate in wildlife and humans, posing a risk to human health and the environment.
The product does not comply with the REACH Regulation nor with the Regulation on persistent organic pollutants (POP Regulation).
Regulation Violation(s):
EU REACH Regulation
EU Persistent Organic Pollutants (POP) Regulation
Alert Number/Link:
Air Humidifier
Description:
The solder has an excessive concentration of lead (measured value up to 32.11%). Lead poses a risk to the environment. The plastic wire cape contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), diisobutyl phthalate (DIBP) (measured values up to 3.76%, 1.69% and 0.11% by weight respectively). These phthalates may harm the health of children, possibly causing damage to their reproductive system. The product also contains short chain chlorinated paraffins (SCCPs) (measured value by weight 0.88 %). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bioaccumulate in wildlife and humans, posing a risk to human health and the environment.
The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive), the Persistent Organic Pollutants (POPs) Regulation nor with the REACH Regulation.
Regulation Violation(s):
EU RoHS 2 Directive
EU REACH Regulation
EU Persistent Organic Pollutants (POP) Regulation
Alert Number/Link:
Peripheral component interconnect (PCI) Card
Description:
The solder joint on the PCI card contains an excessive concentration of lead (measured value 36.0% by weight). Lead poses a risk to the environment.
The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (ROHS2).
Regulation Violation(s):
EU RoHS 2 Directive
Alert Number/Link:
As a result of the violations, the importers of all four products were required to withdraw the products from the European market. Additionally, the manufacturer of the antenna power supply was required to warn consumers of the environmental risks.
Les services de données de GreenSoft peuvent contribuer à éviter la perte d'accès au marché en cas d'infractions à la réglementation
Compliance with EU RoHS, EU REACH, and EU POP is mandatory for affected companies that manufacture or distribute products in the European market. As demonstrated by the enforcement actions above, failure to comply with these regulations can result of loss of market access and other serious consequences for manufacturers and distributors.
GreenSoft Technology provides Data Services to help your company comply with EU RoHS, EU REACH, and EU POP, so that you can ensure you retain market access to the European market.
En savoir plus sur nos services de données ou contactez-nous dès aujourd'hui pour vous lancer.
Abonnez-vous à notre blog
Recherche dans le blog et catégories
Articles similaires
La Commission européenne a publié un projet de renouvellement des dérogations à la directive RoHS de l'UE pour 2026 concernant le plomb et le cadmium, qui prévoit notamment une refonte en profondeur des annexes III et IV. Découvrez les changements prévus, les dates d'expiration proposées et comment les fabricants peuvent se préparer à se conformer à ces nouvelles dispositions.
L'Union européenne a lancé le « EU RoHS Pack 29 » afin de réexaminer les dérogations relatives au mercure et au plomb figurant dans les annexes III et IV. Dix demandes de renouvellement et trois demandes de révocation sont actuellement à l'étude, et une consultation des parties prenantes est prévue en mai 2026. Découvrez comment ces changements pourraient affecter les fabricants et comment GreenSoft peut vous aider à vous conformer à la réglementation.
Regardez le webinaire de GreenSoft consacré aux mises à jour des exemptions RoHS de l'UE pour bénéficier d'une analyse d'experts sur les mises à jour du Pack 22/27, notamment les renouvellements des exemptions 7(a), 6(c) et 7(c)-I ainsi que les nouvelles dates d'expiration. Visionnez-le dès maintenant dans nos archives de webinaires.
Restez en conformité avec les dernières mises à jour de 2026 concernant les exemptions de l'annexe III de la directive RoHS de l'UE. Découvrez les renouvellements des exemptions 6(a), 6(b), 6(c), 7(a) et 7(c)-I, ainsi que l'impact de ces changements structurels sur votre chaîne d'approvisionnement dans le secteur de la fabrication électronique.
